Reading Time: <1 minutePublished on the information site.

Beauty Park Clinic

[https://clinic.beauty-park.jp/]   13 Recommended Dermatology/Clinics for Mole Removal in Nagoya｜Leave it to a famous doctor who is popular by word of mouth for facial mole removal that does not leave any marks and is said to be cheap. 【https://clinic.beauty-park.jp/hokurojokyo-nagoya/】

Reading Time: <1 minuteMany patients who wish to have moles removed visit our clinic. In addition to the scars left after mole removal, everyone is concerned about the pain during treatment and the pain of anesthesia. Local anesthesia is performed with a local anesthetic to remove moles. Since men are particularly sensitive to pain compared to women, our hospital manufactures local anesthetics in-house to reduce pain during anesthesia as much as possible. Generally, local anesthetics are administered by injecting a drug called lidocaine hydrochloride, also known as xylocaine, into the mole removal site with a syringe. The concentrations of xylocaine used in cosmetic surgery are mostly 0.5%, 1.0%, and 2.0%, but since the drug is acidic, the higher the concentration, the greater the difference in pH with the body, and the stronger the pain of the local anesthetic being felt when injected. At our hospital, we adjust the concentration of xylocaine containing a vasoconstrictor called epinephrine to about 0.2%. We mix it with a drug called Meylon, which has an alkaline pH of bicarbonate, to adjust the local anesthetic to be neutral so that it approaches the pH of the body. This significantly reduces the pain during local anesthesia. Unfortunately, the knowledge of how to adjust local anesthetics is not yet widespread among many cosmetic surgeons. The cosmetic surgeons and cosmetic dermatologists I have taught always use Meiron to adjust the pH and dilute the concentration of local anesthetics, rather than using them as is. Also, the thicker the needle used for injection, the stronger the pain when it is inserted into the skin. Depending on the area, anesthesia is administered using extremely thin needles of 30G to 34G, so the pain is significantly reduced compared to when local anesthesia is administered with a normal needle. It is also important in medical terms to take into consideration the method of anesthesia and the drugs used when performing treatment. Private medical treatment requires advanced knowledge, skills, and delicate care. When removing moles for cosmetic purposes, we believe that it is essential for patients to receive the best cosmetic medical services, and we provide treatment accordingly. If you are still afraid of injecting anesthesia into your face, we can perform a special anesthesia method using a small medical vibrator or vibration oscillator that vibrates at an even higher speed, which vibrates the skin near the injection site to cause vibrations and lower the pain threshold.

Reading Time: <1 minuteTreatment methods for mole removal vary depending on the location, size, type, and shape of the mole. Of course, if malignancy is suspected, the mole is excised and a pathological examination of the tissue is performed to determine whether it is malignant or not. In general, if no malignant findings are found with a dermascope and even benign moles are removed by excision, the scars left after excision are often more noticeable than the mole itself. Moles are classified by shape as follows: 1. Raised moles 2. Slightly raised moles 3. Flat moles. Of these, raised moles are easier to remove and are less likely to leave scars. For about 30 years, mole removal has been performed using the vaporization method with carbon dioxide laser irradiation. When you hear the word laser, you may think of something cutting-edge, but the principles of the carbon dioxide laser device itself have hardly evolved since 30 years ago. The theory is also the same. Just because it is a carbon dioxide laser does not mean it will remove the mole cleanly. We offer unlimited carbon dioxide laser irradiation for mole removal at low cost. We receive many consultations about cases where moles were not removed by simply irradiating them at a medical institution and only burn scars remained. It is not true that carbon dioxide laser can be used to remove moles cleanly. In particular, for raised moles, we recommend a method of carefully and precisely evaporating the mole tissue with high-frequency heat to avoid post-burn scarring and remove the scars in an inconspicuous manner. We do not dare to irradiate carbon dioxide laser. Of course, advanced techniques are required technically, but in most cases, it can be removed very cleanly and the postoperative scars are not noticeable. For flat moles, the pigment reaches the deep dermis and subcutaneous tissue, so if you try to remove it completely in one go, it is necessary to evaporate the deep parts as if it is being gouged out, and it is prone to scarring, so it is often difficult to remove it completely in one session. In that respect, if you first evaporate the raised mole tissue to a flat surface, the wound will heal cleanly and scars will be less likely to remain. A specialist can diagnose moles preoperatively to determine what treatment is best and what care is required.

Reading Time: <1 minuteWhat is important in mole treatment is post-treatment care, more than the removal method. No matter how cleanly the mole is removed, if the care for the scar after mole removal is insufficient or inappropriate, there is a high risk of a scar remaining after removal. Whether it is removal by excision, carbon dioxide laser, or high-frequency vaporization, a scar will always be left after mole removal. Caring for this wound in the right way is an important factor that determines whether you will be satisfied with the final result of mole removal. I have seen advertisements that say "Clean mole removal with carbon dioxide laser!!" but is it true? It is a rather exaggerated expression to say that a laser can remove it cleanly. Selectively remove pigment cells and make them disappear. This is the ultimate secret to mole removal. A flat mole with pigment deep in the dermis, called a pigmented nevi, is more difficult to completely remove than a raised mole, and the recurrence rate is higher. Removing it with a carbon dioxide laser means applying heat intensively to the mole tissue and vaporizing the mole tissue with that heat energy. The components of moles can be considered to be the same as those of living organisms, so it is roughly assumed to be composed of 60% water and 40% protein. If heat is applied to this tissue, the skin that comes into contact with the heat will naturally become burned. If this burn is in the shallow part of the dermis, granulation will not occur, epithelialization will occur quickly, and it will heal with almost no scars. The important point of care after mole removal is how quickly this epithelialization will be promoted. The latest wound healing theory recommends moist wound healing care that does not dry out the wound. Of course, disinfecting the wound is contraindicated. It is better to wash the wound every day. At our hospital, after mole removal, we apply antibiotic ointment and then apply a medical wound dressing to the wound. Leave it in this state for three days. Assuming that epithelialization will progress, after three days, the wound dressing will be removed and the wound will be washed in the shower, and the wound dressing will be applied for another three days. This initial care is very important in the process of healing the wound. Unlike the face, scars on the back and upper limbs take much longer to heal after mole removal. In particular, the lower limbs take more than three times longer to heal and for the redness to disappear compared to the face. The wound healing process differs depending on the part of the body. Specialists have a good understanding of which parts of the body heal quickly and which parts heal slowly, and can provide guidance on how to care for them. https://www.sakae-clinic.com/wound/ Mole scar care is important because it is a scar specialist.

Reading Time: <1 minuteMole removal is done by mole excision, carbon dioxide laser treatment, and electrolysis. There are two methods for mole removal: excision and incision. The excision method is exactly what it sounds like: it is a method of removing moles by cutting them out with a scalpel. Scar condition immediately after mole treatment This is a treatment method that can be performed using a tool called a trephine, but it is also a treatment method that uses a scalpel to cut the edge of the mole and heals the scar by the rise of granulation tissue and epithelialization without suturing. The advantages are that it does not require skill, that it can be done without using special tools, and that it can be completed in a short time, but these are all benefits for the doctor and have little benefit for the patient. It is a treatment method that should not be performed unless malignancy is suspected. Incision method is a method in which normal skin including the mole is cut into a spindle shape and sutured. The advantages are that the mole can be completely removed and there is no possibility of recurrence, pathological examination is easily possible, and it is possible to treat even after it is determined to be a malignant tumor. That is. Scar condition immediately after mole treatment The disadvantages are that the scar will be larger than the diameter of the mole, there will be downtime, and stitches will need to be removed, so you will definitely need to visit the hospital. If malignancy is suspected, this treatment method will be performed and a pathology test will be performed on the skin tumor that was removed to confirm that it is not malignant and a pathology diagnosis will be confirmed. Currently, the diagnosis of whether a mole is malignant or benign is performed using dermoscopy as a screening method, and if there is any possibility that it may be malignant, the tumor will be excised and removed, and a pathology diagnosis will be performed. Since this is outsourced, it will take about a week for the test results to be confirmed. Scar condition immediately after mole treatment

Reading Time: <1 minuteIn principle, the anesthetic used for mole removal is lidocaine hydrochloride, or xylocaine.　https://www.kegg.jp/medicus-bin/japic_med_product?id=00000332-003is used. We use xylocaine containing epinephrine, a vasoconstrictor. Epirenamine has the effect of constricting blood vessels during treatment to suppress bleeding and extending the effective time of xylocaine. Although medical school textbooks state that use on the tip of the nose and fingertips is contraindicated, there are currently no clinical problems. (It was thought that vasoconstriction could cause skin necrosis.) A 0.5% to 2.0% concentration is often used, but for mole removal, 0.5% is a sufficient concentration and there is no problem with use. We use xylocaine in our clinic, and as the name xylocaine hydrochloride lidocaine suggests, its pH is acidic 3.3 to 5.0. When injected into the body, especially into the dermis, the drug causes pain due to the difference in pH when it diffuses. For this reason, we mix an alkaline drug called Meylon to further lower the concentration and adjust the pH to about 7.3, which is as close to the body's pH as possible, and we make our own by adjusting the pH. In actual use, the pain during injection is much less than that of conventional xylocaine injections, reducing the burden on the patient. In addition, the needle used to inject is extremely thin, from 30G to 34G, which significantly reduces the pain. When removing multiple moles, an injection is required for each mole, so pain relief care for the patient during anesthesia is always necessary. Although the amount of anesthesia required for mole removal is small and easy, careful injection can relieve pain. At our clinic, we use extremely thin needles and a homemade xylocaine anesthetic with an adjusted pH level to remove moles.